Ford TRANSIT CUSTOM Owner's Manual page 157

All Front-wheel Drive Vehicles
Rotate the head of the jack to position
under the rear leaf spring directly behind
the rear wheel.
Removing a Road Wheel
WARNINGS
Park your vehicle in such a position
that neither the traffic nor you are
hindered or endangered.
Wheels and Tyres
If it has an automatic transmission, move
the transmission selector lever to position
P.
the B-pillar or within the spare wheel.
moving forwards. If you have to fit a spare
wheel with the arrows pointing in the
opposite direction, have the tyre refitted
in the correct direction by an authorised
dealer.
Note: Do not lay alloy wheels face down
on the ground, this will damage the paint.
1.
2. Install the locking wheel nut key.
3. Slacken the wheel nuts.
155
WARNINGS
Set up a warning triangle.
Make sure that your vehicle is on firm,
level ground with the wheels pointing
straight ahead.
Switch the ignition off and apply the
parking brake.
If your vehicle has a manual
transmission, move the transmission
selector lever to first or reverse gear.
Have the passengers leave your
vehicle.
Secure the diagonally opposite
wheel with an appropriate block or
wheel chock. This is located within
Make sure that the arrows on
directional tyres point in the direction
of rotation when your vehicle is
Do not work underneath your vehicle
when it is supported only by a jack.
Make sure that the jack is vertical to
the jacking point and the base is flat
on the ground.
Insert the flat end of the wheel brace
between the rim and the wheel trim
and carefully remove the wheel trim.