5330/5340 IP Phones – User Guide
2. If a password is required, dial your password (and press the Enter softkey if available).
3. Press the Read Message softkey, and do one or all of the following:
•
To display the time the message was sent, press the More Msg softkey.
•
To display the number of the caller, press the More Msg softkey twice.
•
To call the message sender, press the Call softkey.
•
To delete the message, press the Erase Msg softkey.
•
To view the next message, press
You can check for messages from a remote station:
1. Press Superkey (must be programmed to a key).
2. Press the No softkey until "Remote Msging?" appears.
3. Press the Yes softkey.
4. Dial your directory number.
5. Press the Enter softkey.
6. If a password is required, enter your password and press the Enter softkey.
7. Press the Yes softkey.
You can set, change, or clear a password (up to 7 digits, not including 0):
1. Press Superkey (must be programmed to a key).
2. Press the No softkey until "Set Password?" appears.
3. Press the Yes softkey.
4. Do one of the following:
•
To enter a new password, enter your password.
•
To change or clear your password, enter your current password.
5. Press the Enter softkey.
6. To change or clear your password, do one of the following:
•
To change your password, enter your new password and press the Enter softkey.
•
To clear your password, enter 0.
7. Enter your new password again.
8. If you are setting up or changing a password, press the Enter softkey.
9. Press Superkey (must be programmed to a key).
(MESSAGE).
- 74 -