Updating Available Options In The Printer Driver - Lexmark M1100 Series User Manual

Additional printer setup
•
Close all open software programs before installing the printer software.
• For Macintosh users, you may download all the drivers and utilities from our Web site.
1
Obtain a copy of the software installer package.
•
From the Software CD that came with your printer
•
From our Web site:
Go to http://support.lexmark.com, and then navigate to:
SUPPORT & DOWNLOAD > select your printer > select your operating system
2
Double‑click the software installer package.
Wait for the installation dialog to appear.
If you are using the Software CD and the installation dialog does not appear, then do the following:
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type D:\setup.exe > OK.
In Windows 7 or earlier
a
Click or click Start, and then click Run.
b
In the Start Search or Run dialog, type D:\setup.exe.
c
Press Enter, or click OK.
Note: D is the letter of your CD or DVD drive.
3
Click Install, and then follow the instructions on the computer screen.

Updating available options in the printer driver

When any hardware options are installed, you may need to manually add the options in the printer driver to make
them available for use.
For Windows users
1
Open the printers folder.
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type control printers > OK
In Windows 7 or earlier
a
Click or click Start, and then click Run.
b
In the Start Search or Run dialog, type control printers.
c
Press Enter, or click OK.
2
Depending on your device, do either of the following:
•
Press and hold the printer you want to update.
• Right‑click the printer you want to update.
28