Printing A Menu Settings Page; Printing A Network Setup Page; Checking The Status Of Parts And Supplies - Lexmark M1100 Series User Manual

Using M3150
5
From any menu in the Administrative Menus, Management, or Function Access sections, select User PIN
Protected, Admin PIN Protected, or Admin PIN and User PIN Protected.
Note: Using Admin PIN, you can still access a menu assigned with User PIN.
6
Click Submit.
If you try to access a PIN‑protected menu from the printer control panel, then the printer will require you to enter the
PIN.
Note: After you enter the last digit of the PIN, make sure to press
three seconds.

Printing a menu settings page

From the home screen, navigate to:
> Reports > Menu Settings Page

Printing a network setup page

If the printer is attached to a network, then print a network setup page to verify the network connection. This page
also provides important information that aids network printing configuration.
1
From the home screen, navigate to:
> Reports > Network Setup Page
2
Check the first section of the network setup page, and confirm that the status is Connected.
If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning.
Consult a system support person for a solution, and then print another network setup page.

Checking the status of parts and supplies

A message appears on the printer display when a replacement supply item is needed or when maintenance is required.
Checking the status of parts and supplies on the printer control panel
From the home screen, touch Status/Supplies > View Supplies.
Checking the status of parts and supplies from the Embedded Web Server
Note: Make sure the computer and the printer are connected to the same network.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the home screen. The IP address appears as four sets of numbers separated
by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Device Status > More Details.
from the printer control panel for more than
101