Installing Hardware Options; Installing Optional Trays - Lexmark M1100 Series User Manual

Additional printer setup

Installing hardware options

Installing optional trays

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
1
Turn off the printer using the power switch, and then unplug the power cord from the electrical outlet.
2
Unpack the tray, and then remove all packing materials.
3
Pull the tray completely out of the base.
4
Remove any packing material from inside the tray.
5
Insert the tray into the base.
6
Place the tray near the printer.
7
Align the printer with the tray, and then lower the printer into place.
Note: Optional trays lock together when stacked.
1
2
26