Using M3150
6
Type the new IP address in the "Printer Name or IP Address" field.
7
Click OK > Close.
For Macintosh users
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer control panel. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Add the printer.
•
For IP printing:
a
From the Apple menu, navigate to either of the following:
–
System Preferences > Print & Scan
–
System Preferences > Print & Fax
b
Click +.
c
Click the IP tab.
d
Type the printer IP address in the address field, and then click Add.
•
For AppleTalk printing:
Notes:
–
Make sure AppleTalk is activated on your printer.
–
This feature is supported only in Mac OS X version 10.5.
a
From the Apple menu, navigate to:
System Preferences > Print & Fax
b
Click +, and then navigate to:
AppleTalk > select the printer > Add
Finding advanced networking and administrator information
This chapter covers basic administrative support tasks using the Embedded Web Server. For more advanced system
support tasks, see the Networking Guide on the Software CD or the Embedded Web Server Administrator's Guide at
http://support.lexmark.com.
Checking the virtual display
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Check the virtual display that appears at the top left corner of the screen.
The virtual display works as an actual display would work on a printer control panel.
98