Installing The Printer On An Ethernet Network - Lexmark M1100 Series User Manual

Additional printer setup

Installing the printer on an Ethernet network

For Windows users
1
Obtain a copy of the software installer package.
•
From the Software CD that came with your printer
•
From our Web site:
Go to http://support.lexmark.com, and then navigate to:
SUPPORT & DOWNLOAD > select your printer > select your operating system
2
Double‑click the software installer package.
Wait for the installation dialog to appear.
If you are using the Software CD and the installation dialog does not appear, then do the following:
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type D:\setup.exe > OK
In Windows 7 or earlier
a
Click or click Start, and then click Run.
b
In the Start Search or Run dialog, type D:\setup.exe.
c
Press Enter, or click OK.
Note: D is the letter of your CD or DVD drive.
3
Click Install, and then follow the instructions on the computer screen.
4
Select Ethernet connection, and then click Continue.
5
Attach the Ethernet cable when instructed to do so.
6
Select the printer from the list, and then click Continue.
Note: If the configured printer does not appear in the list, then click Modify Search.
7
Follow the instructions on the computer screen.
For Macintosh users
1
Allow the network DHCP server to assign an IP address to the printer.
2
Obtain the printer IP address either:
•
From the printer control panel
•
From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: You will need the IP address if you are configuring access for computers on a different subnet than the printer.
3
Install the printer driver on the computer.
a
Download the driver at http://support.lexmark.com.
b
Double‑click the installer package for the printer, and then follow the instructions on the computer screen.
c
Select a destination, and then click Continue.
30