Colorado™ Controller; Overview; Setup - Chauvet COLORdash Par User Manual

5. COLOR
ADO
LCD Display
Panel
MODE

SETUP

UP
DOWN

Overview

Setup
1. Connect from the OUT on the controller to the DMX Input side of the fixture using a
DMX XLR cable.
2. It is recommended that you power up all COLORado units connected prior to turning
on the controller. This ensures that the controller will auto-detect DMX addresses.
Alternatively you can use {Detect device} from the {Settings} menu.
3. Set ID addresses on the fixtures in ascending order.
4. Set the {Range} in the {Settings} menu.
Note
COLORdash™ Par User Manual
™ C
ONTROLLER
MODE SETUP UP DOWN
Accesses main menu or backs out of sub-menu
Selects the currently displayed menu or
confirms the current function value
Use to navigate upwards through menu items
or increment function values
Use to navigate downwards through menu
items or decrement function values
There is no need to set ID and Range for {Wash} programs.
21
SOLD
SEPARATELY
9/4/2008 12:09 PM