Table of Contents
Advertisement
Optional Equipment
5. Place the stove top upside down on a smooth, non-scratching surface. Install the
stone inserts into the stove top following the directions below. Replace the stove
top and face to finalize the installation.
N o t e : On the Fyrestone the clips and screws are shipped with the stove in the owner's pack.
Note: The granite stones may be slightly thin. This leads to the clips not securing the stones in
place. Before installing, use a hammer or pliers to slightly bend the clips downwards. This will
hold the granite tightly against the stove top.
Place the stone inserts into the indents on the
stove top. Attach with the clips and screws.
NOTE: slide the inserts inwards as
far as possible to prevent them from
striking the sides of the cast body.
These clips are for the linenfold,
marble, & granite inserts.
These clips are for the
soapstone inserts.
Travis Industries
Phillips
Screwdriver
1 0 0 - 0 1 1 5 9
(for qualified installers only)
4 3
4 0 4 0 6 2 1
Hide quick links:
Advertisement
Table of Contents
