Lopi Berkshire Owner's Manual page 42

Optional Equipment
4 2
3. Loosen the front and back bolts holding the side insert retainers following the
directions below.
3/8" Wrench
Loosen the bolts at the
front of the cast sides a
couple of turns. Then
rotate the retainer up.
4. Loosen the bolts holding the retainers in place several turns (see the illustration
below). Slide the side inserts into place. Replace the side insert retainers and
tighten the bolts (do not over-tighten – the side inserts brackets need only be tight
enough to prevent the side inserts from rattling).
Use both hands to guide the side
stones into place.
WARNING: The stones are fragile
and scratch easily.
NOTE: Loosen this bolt several
turns before installing.
Travis Industries
Side Insert Retainer
3/8" Wrench
(rotate out of the way if necessary)
1 0 0 - 0 1 1 5 9
(for qualified installers only)
NOTE: on the Sheffield,
remove the side clips first.
Side Insert Retainer
Rear View
4 0 4 0 6 2 1