Table 11-3 Filesystem Browser - Lantronix XPort AR User Manual

Filesystem Browser
Settings
Create
File
Directory
Upload File
Copy File
Source
Destination
Move
Source
Destination
TFTP
Action
Mode
Local File
Remote File
Host
Port
XPort AR User Guide
Filesystem Browser
Table 11-3
Description
Enter the name of the file you want to create, and then click
Enter the name of the directory you want to create, and then click
Create
.
Enter the path and name of the file you want to upload by means of
Browse
HTTP/HTTPS or use the
Upload
click .
Enter the location where the file you want to copy resides.
Enter the location where you want the file copied.
After you specify a source and destination, click
Enter the location where the file you want to move resides.
Enter the location where you want the file moved.
After you specify a source and destination, click
file.
Select the action that is to be performed via TFTP:
Get
= a "get" command will be executed to store a file locally.
Put
= a "put" command will be executed to send a file to a remote
location.
Select a TFTP mode to use. Choices are:
ASCII

 Binary
Enter the name of the local file on which the specified "get" or "put"
action is to be performed.
Enter the name of the file at the remote location that is to be stored
locally ("get') or externally ("put").
Enter the IP address or name of the host involved in this operation.
Enter the number of the port involved in TFTP operations on which the
specified TFTP get or put command will be performed.
Transfer
Click to perform the TFTP transfer.
11: Maintenance and Diagnostics Settings
button to select the file, and then
Copy
to copy the file.
Move
to move the
Create
.
91