Lantronix Com Port Redirector Quick Start Manual page 10

2. Enter the following information:
Com Port Description
Settings
Buffer If selected, when an application opens a COM port and starts
Writes writing to that port, CPR will buffer those writes and try to send
as many as possible in a single TCP packet (speeds
processing).
Server If selected, enables the com port to reconnect to the device
Reconnect server after the device server disconnects from CPR.
No Net If selected, when an application closes the com port, CPR does
Close not close the network connection. To disconnect CPR from the
device server, right-click the com port in the com port tree view
on the left or in the Com Port List on the right, or select
Disconnect on the Com Port menu.
Connection Number of seconds the com port should wait before attempting
Timeout (in to connect to the next device server in the list, or before
seconds) aborting the connection attempt.
Timeout If selected, CPR re-establishes the connection if the connection
Reconnect times out. When auto-reconnecting, CPR tries to reconnect until
the connection succeeds or the number of tries reaches the
value in Reconnect Limit.
9