Logging In; Logging Off; Figure 3-3 Login Prompt - Lantronix xPrintServer Network Edition User Manual


Up time
The amount of time the xPrintServer has been operational since powered on or last
restarted.

Configured Printers
The number of total discovered printers available for use on iOS devices.

Current Status
The current status of the xPrintServer.

Time Zone
The configured time zone (can be changed through the Admin page)

Status Time
The time at which the system status information you see on the screen was captured.

Locator LED
Clicking the light bulb
rapidly. Clicking the light bulb again turns off this feature. This feature is useful in
situations where you wish to identify a specific xPrintServer amongst multiple units.

Logging In

Once the IP address of the xPrintServer device is known (see
Address and Initial
1. Open an internet web browser.
2. Enter the IP address of your xPrintServer device.
Note: If Bonjour is installed on your computer or Mac, you may also access the user interface by
xPrintServer.local
entering:
3. Enter your login information when prompted.

User Name

Password
You are logged into the xPrintServer user interface when you see
Home Page.

Logging Off

1. Click the Log-Off tab located at the top far right of any xPrintServer user interface page. You
will be prompted to close out of your browser window.
2. Close out of your browser to complete logging off.
xPrintServer User Guide
will cause the "X" LED on top of the xPrintServer unit to blink
Login), you may follow these directions to login to xPrintServer at any time.

Figure 3-3 Login Prompt

3: Navigation and Printing
Finding the xPrintServer IP
System Status on the
14