Logging In; Logging Off; Figure 3-4 Login Prompt - Lantronix xprintserver User Manual


Up time
The amount of time the xPrintServer has been operational since powered on or last
restarted.

Configured Printers
The number of total discovered printers available for use on various PC, tablet or cellular
devices.

Current Status
The current status of the xPrintServer.

Time-zone
The configured time zone (can be changed through the Admin page.)

Status Time
The time at which the system status information you see on the screen was captured.

Locator LED
Clicking the light bulb
rapidly. Clicking the light bulb again turns off this feature. This feature is useful in
situations where you wish to identify a specific xPrintServer amongst multiple units.

Logging In

Once the xPrintServer unit is installed (see
Finding the xPrintServer IP Address and Initial
xPrintServer via Local or Remote Authentication at any time.
To Login:
1. Open an internet web browser.
2. Enter the IP address of your xPrintServer device.
3. Enter your login information when prompted. You are logged into the xPrintServer device's
Admin interface when you see

User Name

Password

Logging Off

1. Click the Log-Off tab located at the top far right of any xPrintServer device's Admin interface
page. You will be prompted to close out of your browser window.
2. Close out of your browser to completely log off.
Lantronix® xPrintServer® User Guide
will cause the "X" LED on top of the xPrintServer unit to blink
Installation Steps) and the IP address discovered (see
Login), you may follow these directions to login to

Figure 3-4 Login Prompt

System Status on the Home
3: Navigation and Printing
Page.
20