Changing Printer Location; Showing Shared Printer Information; Figure 4-6 Show Share Info Popup - Lantronix xPrintServer Network Edition User Manual

8. Click Save. After a few seconds, the printer description will be changed.

Changing Printer Location

The Admin user may use this selection to change the location of a configured printer. This
command is useful for updating the location of printers initially identified as "Auto Discovery".
1. Login to the xPrintServer user interface (see
2. Click the Printers tab to access the Printers > List page (see
3. Utilize Navigation
4. Utilize Search
5. Click the
6. Click Change Location in the popup command menu that appears (or Cancel within the
same menu if you want to back out of it).
7. Type the new description for the printer in the field which appears.
8. Click Save. After a few seconds, the printer name will be changed.

Showing Shared Printer Information

The Admin user may use this selection to make an xPrintServer-provisioned printer visible and
available to iPad, iPhone and other iOS devices. Up to 10 network-attached printers can be seen
and shared at a time.
1. Login to the xPrintServer user interface (see
2. Click the Printer tab to access the Printers > List page (see
3. Utilize Navigation
4. Utilize Search
5. Click the
6. Click Show Share Info in the popup command menu that appears (or Cancel within the
same menu if you want to back out of it). An information popup window appears showing the
printer as it is shared:
7. Click OK in the share info popup window to close it.
xPrintServer User Guide
as necessary in situations where there are multiple pages of printers.
as necessary to find a particular printer.
button beside the printer with location to be changed.
as necessary in situations where there are multiple pages of printers.
as necessary to find a particular printer.
button beside the printer information to be shared.

Figure 4-6 Show Share Info Popup

Logging In) as Admin.
Figure
Logging In) as Admin user.
Figure
4: Configuration
3-4).
3-4).
26