Figure 4-3 Sample Printer Auto Discovery Report; Figure 4-4 Expanding Detected Printers Information - Lantronix xPrintServer Network Edition User Manual

5. Click the Re-run Discovery button within the Printer Auto Discovery Report to manually
check for any new printers that have since been added.
6. Expand the SNMP field to see configuration information about the discovered printer(s). An
example of what you may see in the SNMP field:
SNMP: network lpd://172.19.100.1:515/PASSTHRU "Epson Stylus NX620"
"EPSON Epson Stylus NX620"
"MFG:EPSON;CMD:ESCPL2,BDC,D4,D4PX,ESCPR1;MDL:Epson Stylus
NX620;CLS:PRINTER;DES:EPSON Epson Stylus
NX620;CID:EpsonRGB;FID:FXN,DPA,WFA,ETA,AFN,DAN;" "172.19.100.1"
7. Expand the Detected Printers field, and further expand additional available subcategories
(indicated with a
provisioning results:
Note: If you expand the Printer Auto Discovery Report, you may need to use the left-right and
up-down scroll bar to see the entire contents of your report.
xPrintServer User Guide

Figure 4-3 Sample Printer Auto Discovery Report

icon to the left) to see a list of discovered printers and the status of the

Figure 4-4 Expanding Detected Printers Information

4: Configuration
22