Table of Contents
Advertisement
GPIO (General Purpose Input/Output) 6-Pin
Connector
The GPIO pins are configured using Universal IP (UIP) AT Commands. Refer to the Universal IP (UIP) AT Command Reference
Guide on your MultiModem CD. The following table explains the GPIO functions:
Pin
Number
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
The GPIO pins can be configured independent of each other. An explanation of the difference between the Rev B and Rev C
boards is provided in the Back Panel description in Chapter 1.
●
Pin 1 Digital Input (5V tolerant TTL/CMOS levels) for Rev B, 24 Volt tolerent for Rev C and later.
●
Pin 2 Digital Input (5V tolerant TTL/CMOS levels) for Rev B, 24 Volt tolerent for Rev C and later.
●
Pin 3 can be configured as either Digital Input (5V tolerant TTL/CMOS levels) or Digital Output (3.3V High) or as an
ADC input (0 to 3.3V rail)
●
Pin 4 can be configured as either Digital Input (5V tolerant TTL/CMOS levels) or Digital Output (3.3V High) or as an
ADC input (0 to 3.3V rail)
●
Pin 5 is configured as an ADC input (0 to 3.3V rail)
●
Pin 6 is GND and must be connected to the ground of the attached device
GPIO DC Characteristics
Pins 1,2 - Rev B Board
Input Voltage
Parameter
Input Low-level Voltage
Input High-level Voltage
Pins 1,2 - Rev C and later Board
Input Voltage
Parameter
Input Low-level Voltage
Input High-level Voltage
Pins 3,4
Input Voltage
Parameter
Input Low-level Voltage
Input High-level Voltage
Pins 3, 4
Output Voltage
Parameter
Output Low-level Voltage
Output High-level Voltage
Pins 3,4
Output Current
Parameter
Output Current
Pins 1,2 are digital input only
Pin 5 is an analog input only
Pins 1-5 contain ESD protection
Multi-Tech Systems, Inc. MultiModem iCell Intelligent Wireless Modem User Guide
Description
DIO 0
DIO 1
DIO 2 / ADC 0
DIO 3 / ADC 1
ADC 2
Gnd
Min
-0.3
2.0
Min
0.3
3.0
Min
-0.3
2.0
Min
0.0
2.9
Min
Chapter 1 – Product Description and Specifications
GPIO 6-Pin
Connector
Max
Units
0.8
V
5.5
V
Max
Units
1.0
V
24
V
Max
Units
0.8
V
5.5
V
Max
Units
0.4
V
3.3
V
Max
Units
2
mA
11
Advertisement
Table of Contents
