Alternator Battery Charger Curve - 24 V, 6 A; Alternator - 12 V, 14 A; Alternator Battery Charger Curve Standard - 12 V, 14 A; Magnetization Checking Tool (Part No. 7000-9727-001) - Kohler KD 625/2 Workshop Manual

7
Electric System
152
153
Amp.
154
155
- 68 -

Alternator battery charger curve - 24 V, 6 A

The curve was obtained at room temperature of +20°C with 25 V battery
voltage.

Alternator - 12 V, 14 A

Features a fixed armature winding mounted on the air shroud bracket.
The rotating permanent magnet inductor is located in the fan spindle.
There are the two yellow cables and one red cable at output.
Dimensions (mm):
A = 158.80÷159.20
B = 27.50÷27.90
Note: Clearance between armature winding and inductor (air gap)
should be 0.48÷0.60 mm.

Alternator battery charger curve standard - 12 V, 14 A

The curve was obtained at room temperature of +25°C with 12,5 V
battery voltage.

Magnetization checking tool (Part No. 7000-9727-001)

Components:
1 Casing
2 Slider
3 Casing reference line
4 Slider reference line
Rest the tool end horizontally onto the magnetic poles.
Hold slider so that its reference line coincides with the casing refe-
rence line.
Release slider: if no attraction occurs the rotor is demagnetized, in this
case replace alternator.
KD 625-2 Workshop Manual_cod. ED0053029380_1° ed_ rev. 00