Prescribed Lubricant - Kohler KD 625/2 Workshop Manual

3
Maintenance - Recommended oil type - Refilling

PRESCRIBED LUBRICANT

In the countries where AGIP products are not available, use oil API SJ/CF for Diesel engines or oil corresponding to the military
specification MIL-L-4165 D/E.
For a temperature of -10°C an oil with a 5W40 viscosity is recommended.
For a temperature of -15°C an oil with a 0W30 viscosity is recommended.
Danger - Attention
- The engine may be damaged if operated with insufficient lube oil.
- It is also dangerous to supply too much lube oil to the engine because a sudden increase in engine rpm could be caused
by its combustion.
- Use proper lube oil preserve your engine.
Good quality or poor quality of the lubricating oil has an affect on engine performance and life.
- If inferior oil is used, or if your engine oil is not changed regularly, the risk of piston seizure, piston ring sticking, and
accelerated wear of the cylinder liner, bearing and other moving components increases significantly.
- Always use oil with the right viscosity for the ambient temperature in which your engine is being operated.
Danger - Attention
- The used engine oil can cause skin-cancer if kept frequently in contact for prolonged periods.
- If contact with oil cannot be avoided, wash carefully your hands with water and soap as soon as possible.
- Do not disperse the oil in the ambient, as it has a high pollution power.
- 24 -
AGIP SUPERDIESEL
MULTIGRADE
specifications
10W40
KD 625/2 ENGINES OIL CAPACITY
API CF4 / SG
ACEA B2 - E2
MIL - L-4165 D/E
KD 625-2 Workshop Manual_cod. ED0053029380_1° ed_ rev. 00