How To Connect Cables; Connection Of Single Mlcd - Orion OLM-5510 User Manual

ORION

4. How to Connect Cables

• Do not connect/disconnect cables while MLCD or other external equipments are turned on.
• First turn off the power all the attached equipment and make connections.
• Make sure the power cord is inserted properly into the power inlet to prevent unexpected pullout
of the cord.

4.1. Connection of Single MLCD

• MLCD and PC should be connected; a Com Port in a PC and RS-232C IN port in a MLCD is
connected with supplied RS-232C cable.
• MLCD On/Off or Screen adjustment can be controlled by MSCS (Multi-Screen Control System).
• ID setting on the backside of MLCD must be identical with the ID setting in MSCS to control
MLCD with a PC.
• If you do not have Com Port, you need to use an USB converter for RS-232C. Depending on
manufacturers or models, converters may cause malfunction.
VCR
PC
PC (MSCS) to control MLCD
Videoconnection
(Maximum5m)
PCConnection
(Maximum5m)
DVIconnection
(Maximum5m)
※ I fyouneedlongerconnection,
pleaseuseDVIboostersor
DVIfiber-opticcable.
RS-232C(Maximum15m)
- 20 -
Infinitely Expandable
MLCD
• Model Name : OLM-4610
• Voltage : AC~100 - 240V
• Frequency : 50/60Hz • Current : Max. 3A
• Serial No :
CO., LTD.
Made in Korea
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
To prevent electric shock, Do not remove cover.
to qualified service personal. No user serviceable part inside Refer servicing
ID SELECT
PC
IN OUT
VIDEO
FAN STB PWR ON
IN OUT
DVI-D
LAN IN OUT
RS-232C
SVC IN OUT
• I DswitchmustbesetasID
1foronesetuse.
PC
IN OUT
VIDEO
IN OUT
DVI-D
ID SELECT
FAN STB PWR ON
IN OUT
LAN
RS-232C
IN OUT
SVC
- 21 -
MLCD
[MLCD ID 01]