Specialized BICYCLE Owner's Manual page 52

irrelevant to what happens to your body.
What should you expect from your carbon frame? It depends on many
complex factors. But we can tell you that if the
or frame may be completely broken. Note the significant difference in behavior
between carbon and metal. See Section 2. A, Understanding metals in this
Appendix. Even if the carbon frame was twice as strong as a metal frame, once
the carbon frame is overloaded it will not bend, it will break completely.
Inspection of Composite Frame, Fork, and Components
Cracks:
Inspect for cracks, broken, or splintered areas. Any crack is serious. Do not
ride any bicycle or component that has a crack of any size.
Delamination:
Delamination is serious damage. Composites are made from layers of
fabric. Delamination means that the layers of fabric are no longer bonded
together. Do not ride any bicycle or component that has any delamination.
These are some delamination clues:
1. A cloudy or white area. This kind of area looks different from the ordinary
undamaged areas. Undamaged areas will look glassy, shiny, or "deep," as if one
was looking into a clear liquid. Delaminated areas will look opaque and cloudy.
2. Bulging or deformed shape. If delamination occurs, the surface shape may
change. The surface may have a bump, a bulge, soft spot, or not be smooth and
fair.
3. A difference in sound when tapping the surface. If you gently tap the surface
of an undamaged composite you will hear a consistent sound, usually a hard,
sharp sound. If you then tap a delaminated area, you will hear a different sound,
usually duller, less sharp.
Unusual Noises:
Either a crack or delamination can cause creaking noises while riding. Think
about such a noise as a serious warning signal. A well maintained bicycle will
be very quiet and free of creaks and squeaks. Investigate and find the source
of any noise. It may not be a crack or delamination, but whatever is causing the
noise must be fixed before riding.
WARNING: Do not ride a bicycle or component with any
delamination or crack. Riding a delaminated or cracked frame, fork
or other component could lead to complete failure, with risk of
serious injury or death.
C. Understanding components
It is often necessary to remove and disassemble components in order to
properly and carefully inspect them. This is a job for a professional bicycle
mechanic with the special tools, skills and experience to inspect and service
today's high-tech high-performance bicycles and their components.
impact is hard enough, the fork
47