Timex Ironman SLEEK 250-LAP User Manual page 5

SETTING
Target pace
(TARGET PACE)
Maximum target range
(TARGET RANGE +)
Minimum target range
(TARGET RANGE -)
Target distance
(TARGET DIST)
1. Press MODE until SETUP displays.
2. Press START/SPLIT/+ until TARGET TIME displays.
3. Press SET.
4. Press START/SPLIT/+ and DISPLAY/TAP ON-OFF/- to select ON.
5. Continue pressing MODE, START/SPLIT/+, and DISPLAY/TAP ON-OFF/- to set
target pace, target range, and target distance.
6. Press SET to exit.
Your total time (target pace multiplied by target distance) displays.
SETTING AUTO-SPLITS
Set the SLEEK™ 250 to automatically take a lap/split in Chrono mode when you have run for a
specified distance or time. After doing this, you need not touch the watch to take laps/splits, so
you need not slow down or take your eyes off of the road. An audible alert sounds when an auto-
split is taken in Chrono mode.
1. Press MODE until SETUP displays.
2. Press START/SPLIT/+ to select AUTO SPLIT.
3. Press SET.
4. Press START/SPLIT/+ or DISPLAY/TAP ON-OFF/- to select ON, and then press
MODE.
5. Press START/SPLIT/+ or DISPLAY/TAP ON-OFF/- to select BY DIST or BY TIME,
and then press MODE.
6. Continue pressing START/SPLIT/+, DISPLAY/TAP ON-OFF/-, and MODE to set the
distance or time for the lap/split.
7. Press SET to exit.
FUNCTION
The number of minutes in which you want to complete each mile or kilometer.
The time by which your pace may exceed your target and still be ON TARGET.
The time by which your pace may fall short of your target and still be ON
TARGET.
The distance you want to cover during a workout (optional).
5