Setup & Installation - SCIFIT ISO1000R User's Operation Manual

Recumbent bike fit-key compatible
Hide thumbs Also See for ISO1000R:
Table of Contents

Advertisement

Placement
of
Position the unit in a location that has a stable and
level sub-floor.
Equipment should be positioned
in a location that is not in direct sunlight, in areas
of
extreme
temperature
the equipment may be splashed with water or
fluids. This machine is intended for indoor use only.
Equipment
should
be
perimeter
of
40"
WARNING
Failure to place the equipment on a stable and level
sub-floor with a safety perimeter can result in injury
to yourself and others.
Level Cardiovascular Machine
If the sub-floor is unlevel, the unit is equipped with
leveling end caps. The end caps are designed with
the recess of end cap off centered. This allows you
to rotate the endcap(s) to a position that will level
the equipment. After adjustment, check and make
sure end caps are fully seated against base frame
tubes.
Offset Endcap
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
SETUP & INSTALLATION
Cardiovascular
and
humidity,
or
positioned
with
or
1
meter
around
Machine
where
Endcap
a
safety
unit.
40" / 1 Meter
Safety Space
Endcap
Proper Supervision
Close supervision is required when the exercise
machine is being used by or near individuals with
disabilities. Keep unsupervised children outside the
safety perimeter.
Cleaning
Never clean the machine with organic solvents,
alcohol or bleach based cleaners.
healthy environment, wipe any sweat off of unit with
a commercially manufactured wipe designed for the
finess industry, or a damp cloth.
4
40" / 1 Meter
Safety Space
40" / 1 Meter
Safety Space
40" / 1 Meter
Safety Space
To promote a
Endcap
Endcap

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iso7000r

Table of Contents