Graco Optimiser 2K 02748 Instructions Manual page 16

Daily Gun Care, Flushing, and Cleaning
3. Clean the gun. (continued)
G. Install the fluid nozzle (20) air cap seal (47), air
cap ring (12), and air cap (19) as instructed on
page 8.
H. Dampen a soft cloth with soapy water;
squeeze out the excess water. Point the gun
down and wipe off the outside of it.
Fig. 28
4. Lubricate the following gun parts daily,
using Part No. 111–265 lubricant. See Fig. 29.
Pattern adjustment valve threads
Fluid adjustment knob threads
Trigger pivot pin
Fluid needle shaft
Activator nuts, in the area where they contact
the trigger
Lubricate
02782A
Fig. 29
Lubricate
Lubricate
02756B