Table of Contents
Advertisement
Quick Links
INSTRUCTIONS–PARTS LIST
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
INSTRUCTIONS
ACETAL HUSKYt 307, WALL-MOUNT PUMP, DRUM SUCTION
PROt/ Delta Sprayt Packages
Metal fluid fittings and hose couplings are stainless steel.
100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure
Packages with Fluid Pressure Regulators
Model No. 240–349
with hoses and Delta Spray air spray gun
Model No. 240–350
with hoses and Delta Spray HVLP gun
Model No. 240–351
no hoses or gun
Model No. 240–352
with hoses and PRO 3500sc electrostatic gun
Model No. 240–353
with hoses and PRO 4500sc electrostatic gun
Packages with Surge Tanks
Model No. 240–361
with hoses and Delta Spray air spray gun
Model No. 240–362
with hoses and Delta Spray HVLP gun
Model No. 240–363
no hoses or gun
This gun and hose for PRO 3500sc
Electrostatic package
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
Graco Inc. is registered to I.S. EN ISO 9001
First choice when
quality counts. t
This manual contains
changes not included
throughout the contents.
Please see the second
page of this book (page 1A)
for a description of the
revisions and additions.
This gun and hose for Delta Spray Air Spray
package or Delta Spray HVLP package
308–845
Rev. C
8119A
Advertisement
Table of Contents
Related Manuals for Graco 240-349
Summary of Contents for Graco 240-349
- Page 1 INSTRUCTIONS–PARTS LIST This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. INSTRUCTIONS ACETAL HUSKYt 307, WALL-MOUNT PUMP, DRUM SUCTION PROt/ Delta Sprayt Packages Metal fluid fittings and hose couplings are stainless steel. 100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Packages with Fluid Pressure Regulators Model No.
- Page 2 Instruction Manual – Parts List Changes This page contains a summary of changes or additions that do not appear in the contents of the manual. Improve pressure control instructions (Graco Ref. 6557). Change 30psi HVLP fluid regulator and gauge to a 60psi gauge and regulator. Obsolete suction tube (Graco Ref. 6557).
- Page 3 Notes 308845...
-
Page 4: Table Of Contents
Table of Contents Warnings ....... . . Setup ........Operation . - Page 5 EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result INSTRUCTIONS in a serious injury. D This equipment is for professional use only. D Read all the instruction manuals, tags, and labels before operating the equipment. D Use the equipment only for its intended purpose.
-
Page 6: Setup
CAUTION This equipment is compatible with most water-based materials. See the wetted parts in the Technical Data section and your fluid and solvent manufacturer’s compatibility information. Do not use acid catalyzed materials; they are incom- patible with the acetal used in this pump. WARNING TOXIC FLUID HAZARD Hazardous fluid or toxic fumes can... - Page 7 Assembling the Wall-Mount Unit See Fig. 1 Install the wall bracket (G) 5 ft (1.5 m) above the floor. For proper hole dimensions, use the Wall Mounting Hole Layout page 15. Be sure the wall is strong enough to support the weight of the pump and hoses, any accessories, the fluid, and stress caused by pump operation.
-
Page 8: Operation
Using the Gun See the gun instruction manual for gun operation, care, flushing, cleaning, and technical data. Read the entire gun manual before operating the sprayer. Pressure Relief Procedure See Fig. 1 WARNING The system remains pressurized until pressure is manually relieved. - Page 9 Priming the System See Fig. 1 1. Close the gun air regulator (F). 2. If your system has a fluid pressure regulator (G), close it. 3. Open the bleed-type master air valve (K). 4. Slowly set the pump air regulator (E) pressure to 20 to 30 psi (140 to 210 kPa, 1.4 to 2.1 bar).
- Page 10 When to Shut Down the System Shut down the system at the end of the work shift and before checking, adjusting, cleaning, or repairing the system. Always relieve the pressure. WARNING To reduce the risk of serious injury whenever you are instructed to relieve pressure, always follow the Pressure Relief Procedure on page 6.
-
Page 11: Maintenance
See the separate component instruction manuals for individual component maintenance procedures. Access to some system components requires that you remove the shields. The following steps are for shield removal. Shield replacement is the reverse of these steps, so make sure you take notes on the proper hose connections. -
Page 12: Parts List And Parts Drawing 240-349 To 240-353
Wall-Mount Packages with Fluid Pressure Regulators Model No. 240–349, Delta Spray air spray package Model No. 240–350, Delta Spray HVLP package Model No. 240–351, no hoses (31) or gun (30) Model No. 240–352, PRO 3500sc electrostatic package Model No. 240–353, PRO 4500sc electrostatic package Ref. -
Page 13: Parts Drawing
Wall-Mount Packages with Fluid Pressure Regulators Model No. 240–349, Delta Spray air spray package Model No. 240–350, Delta Spray HVLP package Model No. 240–351, no hoses (31) or gun (30) Model No. 240–352, PRO 3500sc electrostatic package Model No. 240–353, PRO 4500sc electrostatic package Parts Drawing 222–300 shown... -
Page 14: 240-361 And 240-363
Wall-Mount Packages with Surge Tanks Model No. 240–361, Delta Spray air spray package Model No. 240–362, Delta Spray HVLP package Model No. 240–363, no hoses (31) or gun (30) Ref. Part No. Description 240–210 SHIELD ASSY, front Contains 1a to 1h, shown in Fig. 2 on page 9 106–285 BOLT, “U”... - Page 15 Wall-Mount Packages with Surge Tanks Model No. 240–361, Delta Spray air spray package Model No. 240–362, Delta Spray HVLP package Model No. 240–363, no hoses (31) or gun (30) Parts Drawing Grounding Detail 8089A 308-845...
-
Page 16: Fluid Filter Kit 240-440
Accessory Fluid Filter Kit Fluid Filter Kit 240–440 Ref. Part No. Description 114–361 FILTER, fluid 113–322 CONNECTOR, male 054–188 TUBE; PTFE;R3/8” O.D. 113–534 ELBOW, male x female 111–917 NIPPLE; Nylon The Fluid Filter Kit, listed above, can be installed to filter fluid drawn by the suction tube after it comes out of the pump. -
Page 17: Technical Data
Category Maximum fluid working pressure Maximum incoming air pressure Maximum operating temperature Pump Fluid pressure regulator Air pressure regulators Wetted parts: fluid hoses for Delta guns Wetted parts: fluid hoses for PRO guns Wetted parts: other fluid hoses and tubing Wetted parts: fluid fittings Weight (without hoses or gun): packages with fluid pressure regulator... -
Page 18: Graco Standard Warranty
Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.