Shut-Down Instructions - Graco GC-1412 Operation Manual

Shut-down

Shut-Down Instructions

Due to the different O-Ring materials and lubricants
used in the Guns never submerge or soak any
dispense gun in any type of solvent!
Submerging or soaking any Gun will immediately void
the Gun warranty.
1.
activated. Refer to gun manuals if needed.
Push in and rotate
23774-00 to stop
the trigger from being
activated.
Formula Gun
to stop the trigger
from being activated.
22
Notice
Indy Gun
2.
Push down the yellow slide valve, P/N 21402-00 on the
inlet air to bleed off air on system.
3.
Turn catalyst yellow ball valve, P/N 21228-00 to Open
/ Recirculation position to dump psi. and close the valve.
4.
Pressure should be maintained on the resin hose.
If you are using the Indy gun install the night plug
p/n 23527-00.
Refer to gun manuals for service and maintenance.
GC-1412D