Set-Up; Set-Up Instructions; Tools Required - Graco GC-1412 Operation Manual

Set-Up

or wall mount etc. should be completely assembled
before starting the following steps.

Tools Required:

3) Tape measure
All "Required tools" are standard sizes.
1.
Loosen clamp bolts to expose pump mounting
HEX BOLTS
19890-00
GC-1412D
2.
a. Stand the pump assembly next to the mast and
Lift to desired height with the pump assembly facing
the front of the cart as shown, approximately 41in.
from the top of the cart to the top of the pump mount-
possible.
41in./104 cm.
APPROX.
7