Loading Paper In Tray; Tray); Paper Table - Oce cm4010 User Manual

LOADING PAPER IN TRAY 5 (Large capacity

tray)

The large capacity tray can hold up to 3500 sheets of 8-1/2" x 11" or A4 size paper (20 lbs. (80 g/m
The paper size of tray 5 can only be changed by a Océ service technician.
For detailed information on the paper that can be loaded, see the specifications in the Safety Guide and "Paper Tray
Settings" in the System Settings Guide.
1
2
Indicator
line
3
If "Disabling of Duplex" is enabled in the system settings (administrator), insert letterhead and pre-printed paper with
the print side face down.
Pull out tray 5.
Gently pull the tray out until it stops.
Fan the paper.
Before loading the paper, fan it well. If the paper is not fanned,
multiple sheets may feed at once and cause a misfeed.
Place the paper in the center of the

paper table.

Insert the paper with the print side face down.
However, letterhead and pre-printed paper should be inserted
with the print side face up.
The paper stack must not be higher than the indicator line (no
more than 3500 sheets).
26
2
)).