5
To check the advanced preview, press Proof
Copy.(p. 5-10)
Press the Start key.
Reference
-
If the optional Security Kit SC-507 is installed, and [Security Details] [Password Copy] is set to [Yes]
in Administrator Settings, when scanning an original with a password embedded, a message prompting
you to enter a password appears. Press [Password], enter the password, and then press [OK]. On the
screen that reappears, press [Begin Authentication] to start sending.
-
If the optional Security Kit SC-507 is installed, and [Security Details]
Administrator Settings, you cannot send an original with copy guard patterns embedded.
5.1.3
Recalling a program
The following describes the procedure to use the scan/fax program.
Press Fax/Scan.
Press Mode Memory.
5-6
Operation flow
[Copy Guard] is set to [Yes] in
VL3622c/VL2822c/VL2222c
5.1