Operation - TANDBERG 880 MXP User Manual

MBTelehealth – Tandberg 880 MXP User Guide
4.
Press the AUX button
Document Camera image to the far site.
5.
Press the Main Cam button

13.2 Operation

To operate the document camera:
1.
Turn the document camera on by pressing the power switch located on the
right-hand side of the equipment.
2.
Under the LAMP controls, located at the front of the document camera, press the
Base button to illuminate the lamp at the base of the document camera to show
transparencies or x-rays. Press the Upper button to illuminate documents or
objects.
3.
Under the INPUT options, select either: Internal/ AV 1/ AV 2 (depending upon
where the input has been selected for that piece of equipment). For example:
The Internal setting is utilized by the main camera of the document handler. The
AV 1 setting can be used to add a digital camera. The AV 2 setting can be used
to add a general patient cameral equipment to the document camera.
4.
Press the POSI/NEGA button to change to the appearance of the image to
positive or negative view. For example, if you are examining an x-ray and would
like to show more details of the bone structure, select the N button. Select the P
button for normal view.
5.
Under the ZOOM options, press the Tele button to increase the size of the image
or press the Wide button to decrease the size of the image.
6.
Under the FOCUS options, press the Auto button to focus in the picture
automatically. You may need to use the Manu (N) or (F) buttons to adjust the
focus slightly in order to enhance the picture.
7.
Once you are finished using the document camera, press the power switch to
turn it off.
Make sure that the camera boom is extended and locked and that the
camera is centered.
on the Tandberg remote control to display the
to return to the previous view.
Document Camera Control Panel
Page 26 of 31