Laptop/Pc Connection - TANDBERG 880 MXP User Manual

MBTelehealth – Tandberg 880 MXP User Guide
Another method to disconnect a call is to press the Menu key on the remote
control. When the End Call Dialogue box is displayed, select the red End Call
icon by pressing the OK button on the remote control.
3. Push the on/off switch located at the back of the codec (if applicable).
4. Place the remote control in a safe area.
It takes a few moments for the audio to turn off when disconnecting from a
call. Therefore, it is important to mute the microphone when the session is
over.
9.0

LAPTOP/PC CONNECTION

To connect a laptop to the videoconferencing equipment:
1.
Using a VGA/ DVI cable, connect the DVI end to the DVI- In at the back of the
codec.
End Call Dialogue Box
DVI Connector
Rear View of the Camera and Codec
Page 14 of 31