Near End Presentation W S-Video Out - TANDBERG 880 MXP User Manual

MBTelehealth – Tandberg 880 MXP User Guide
6. Press the Presentation button again to return to your main camera image
10.3.1 Diagram
LCD Projector
Video Splitter
VGA In
VGA Out

10.4 Near End Presentation w S-Video Out

This method of connection allows you to display the near end presentation through the
video conference equipment and the LCD Projector simultaneously. Use this set up if a
video splitter is not available and the LCD projector does not have video output
capabilities.
To display the near end presentation using S-Video out on the codec:
1. Using a VGA/DVI cable, connect the DVI end to PC DVI In on the back of the
codec then connect the VGA end to the matching port on the laptop and turn the
laptop on
2. Using an S-Video cable, connect one end to S-Video Out on the back of the
codec then connect the other end to a S-Video input on the LCD projector.
VGA In DVI In
VGA Out
Laptop
Page 18 of 31
Codec
VGA Out