Adjusting Front Seats; Separate And Split Bench Seat; Non–Split Bench Seat; Seat Position Adjusting Lever - Toyota Tacoma 2002 Operating Manual

—Adjusting front seats

Separate and split bench seat

'02 Tacoma U (L/O 0109)
Non–split bench seat
2002 MY TACOMA_U (OM35786U)

1. SEAT POSITION ADJUSTING LEVER

Pull the lever up. Then slide the seat
to the desired position with slight
body pressure and release the lever.
2. SEATBACK ANGLE ADJUSTING
LEVER (except bench seat)
Lean forward and pull the lever up.
Then lean back to the desired angle
and release the lever.
CAUTION
To reduce the risk of sliding under
the lap belt during a collision, avoid
reclining the seatback any more than
needed. The seat belts provide maxi-
mum protection in a frontal or rear
collision when the driver and the pas-
senger are sitting up straight and
well back in the seats. If you are
reclined, the lap belt may slide past
your hips and apply restraint forces
directly to the abdomen. Therefore, in
the event of a frontal collision, the
risk of personal injury may increase
with increasing recline of the seat-
back.
25