Brake Pad Wear Limit Indicators - Toyota Tacoma 2002 Operating Manual

"ABS" warning light
The light comes on when the ignition key
is turned to the "ON" position. If the anti–
lock brake system works properly, the
light turns off after a few seconds. There-
after, if the system malfunctions, the light
comes on again.
When the "ABS" warning light is on (and
the brake system warning light is off), the
anti–lock brake system does not operate,
but the brake system still operates con-
ventionally.
When the "ABS" warning light is on (and
the brake system warning light is off), the
anti–lock brake system does not operate
so that the wheels could lock up during
a sudden braking or braking on slippery
road surfaces.
If either of the following conditions
occurs, this indicates a malfunction
somewhere in the parts monitored by
the warning light system. Contact your
Toyota dealer as soon as possible to
service the vehicle.
D
The light does not come on when the
ignition key is turned to the "ON" posi-
tion, or the light remains on.
D
The light comes on while you are driv-
ing.
'02 Tacoma U (L/O 0109)
A warning light turning on briefly during
operation does not indicate a problem.
With rear differential lock: However, it is
a normal operation for the light to be on
with rear differential locked. At this time,
the anti–lock brake system does not oper-
ate.
2002 MY TACOMA_U (OM35786U)
Brake pad wear limit
indicators
The brake pad wear limit indicators on
your disc brakes give a warning noise
when the brake pads are worn to where
replacement is required.
If you hear a squealing or scraping noise
while driving, have the brake
checked and replaced by your Toyota
dealer as soon as possible. Expensive ro-
tor damage can result if the pads are not
replaced when necessary.
pads
197