Connecting Point For 5Vz–Fe Engine - Toyota Tacoma 2002 Operating Manual

Discharged battery
Positive
terminal
("+" mark)
Positive terminal
Jumper cable
("+" mark)
4. Make the cable connections in the or-
der a, b, c, d.
a. Connect the clamp of the positive
(red) jumper cable to the positive (+)
terminal on the discharged battery.
b. Connect the clamp at the other end
of the positive (red) jumper cable to
the positive (+) terminal on the booster
battery.
220
Booster
battery
Discharged battery
Booster battery
c. Connect the clamp of the negative
(black) jumper cable to the negative (–)
terminal on the booster battery.
d. Connect the clamp at the other end
of the negative (black) jumper cable to
a solid, stationary, unpainted, metallic
point of the vehicle with the discharged
battery.
The recommended
are shown in the following illustrations:
2002 MY TACOMA_U (OM35786U)
'02 Tacoma U (L/O 0109)
Jumper cable
Negative
terminal
("–" mark)
Connecting point for 2RZ–FE and 3RZ–FE
engines
connecting points
Connecting point for 5VZ–FE engine