To Use The Anchor Bracket - Toyota Tacoma 2002 Operating Manual

TO USE THE ANCHOR BRACKET:

Regular cab with bench seat—
1. Pull the seatback release lever and
swing the seatback forward slightly,
then latch the hook onto the anchor
bracket.
Return the seatback to its original
position.
'02 Tacoma U (L/O 0109)
2. Fix the child restraint system with
the seat belt and tighten the top
strap.
For instructions on installing the child re-
straint system, see "Child restraint" in this
section.
2002 MY TACOMA_U (OM35786U)
CAUTION
D
When returning the seatback to its
original position, make sure
seatback is securely locked
pushing forward and rearward on
the top of the seatback.
D
Make sure the top strap is securely
latched, and check that the child
restraint system is secure by push-
ing and pulling it in different direc-
tions. Follow all the installation in-
structions provided by its manufac-
turer.
the
by
93