Routing
device
2. Fix the child restraint system with
the seat belt.
Route
the
top strap
through the
routing device as shown in the il-
lustration.
For instructions on installing the child re-
straint system, see "Child restraint" in this
section.
CAUTION
Make
sure
the
top
strap
twisted.
100
3. Latch the hook onto the rear lower
anchor bracket and tighten the top
strap.
Store the removed cover in a safe place
such as the glove box.
Be sure to replace the cover when the
anchor bracket is not in use.
is
not
2002 MY TACOMA_U (OM35786U)
'02 Tacoma U (L/O 0109)
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
CAUTION