Assembly And Installation - Harman Stove Company PC 45 Installation & Operating Manual

Rear Cover
Panels
4 PC 45 Corn/Pellet Stove

Assembly and Installation

Shipping Bolts: These holes
are also used for Mobile Home
Installation
Fig. 1
unpacking
The PC 45 is bolted to the skid to prevent move-
ment during shipping.
To free the stove from the skid you must remove
the hold-down bolts in the rear of the pedestal
base.
removing or Installing rear panels
To remove the rear cover panels, loosen the
screws slightly and slide the covers outward as
shown in figure 1. To reinstall, simply slide back into
place and retighten the screws.
Firebrick
Install the firebrick vertically on the angle above
the burnpot.
Fig. 2