Table of Contents
Advertisement
Blower Variable
Speed knob
Installation
DO NOT INSTALL IN A SLEEPING ROOM
Assembly
Blower ( Optional )
1/4-20 bolts. Tighten the bolts, but do not overtighten.
built-in to the power cord. When first starting a fire, keep the
blower off. After a good bed of coals is established, you can
run the blower at any speed desired.
grounded outlet, and must be routed away from the appliance.
Top Air Grill
Top Air Grill ( Optional )
nector is installed.
and position as shown at left. It is held in place by gravity.
subtract from the performance of the stove.
TLC 2000 Coal Stove
Bolt the blower to the bottom rear of the stove with four
The blower speed can be adjusted using the knob that is
The power cord for the blower must be connected to a
The top air grill must be installed before the chimney con-
To install simply place the top air grill over the flue out let
The top air grill is a decorative option that does not add or
15
Advertisement
Table of Contents
