NEC N8100-14522F User Manual page 84

4-16 Configuring Your Server
Advanced Chipset Control
Option
Multimedia Timer
Intel(R) I/O AT
Wake On
LAN/PME
Wake On Ring
Wake On RTC
Alarm
IMPORTANT:
feature is enabled, this feature is disabled at the next system boot after
AC power-on. You need to press the Power switch to boot the system. If
the AC power is turned off, Wake On Ring feature on power
management chip is disabled until the next DC power-on.
Parameter
[Disabled]
Enabled
Disabled
[Enabled]
Disabled
[Enabled]
[Disabled]
Enabled
[Disabled]
Enabled
If the AC power is turned off while the Wake On Ring
Description
Specify whether the system supports
the multimedia timer feature.
Specify whether the Intel(R)
Acceleration technology is enabled or
disabled.
Specify whether the remote power-on
function via the network is enabled or
disabled.
Specify whether the remote power-on
function through a serial port is
enabled or disabled.
Specify whether the remote power-on
function by using RTC alarm feature is
enabled or disabled.
Your Setting
[ ]: Factory-set