System Event Logs; External Devices - NEC N8100-14522F User Manual

4-6 Configuring Your Server
Keyboard
To set Numlock
Select [Advanced] - [Numlock] – [On]/[Off].

System Event Logs

To clear system event logs
Select [Server] - [Event Log Configuration] - [Clear All Event Logs] - [Enter] - [Yes].
Security
To set passwords on the BIOS
Select [Security] - [Set Supervisor Password] and enter a password.
Select [Security] - [Set User Password] and enter a password.
Set Supervisor password first, then User password.

External Devices

To setup I/O ports
Select [Advanced] - [Peripheral Configuration] and set up each I/O port.
Internal Devices
To configure the internal PCI device
Select [Advanced] - [PCI Configuration] and setup each devices.
To install the RAID controller
Select [Advanced] - [PCI Configuration] - [PCI Slot n Option ROM] - [Enabled].
n: PCI slot number
To clear the hardware configuration data (after installing/removing internal devices)
Select [Advanced] - [Reset Configuration Data] - [Yes] and reboot.