NEC N8100-14522F User Manual page 80

4-12 Configuring Your Server
Advanced
Option
Boot-time Diagnostic
Screen
Reset Configuration Data
NumLock
Memory/Processor Error
IMPORTANT:
"Yes" for [Reset Configuration Data], because the information on boot
device will be cleared. Select [Exit Saving Changes] to reboot the
system, run BIOS SETUP utility, and provide settings for boot device
order again.
Parameter Description
Enabled When enabled, the BIOS will display
the POST execution screen.
[Disabled]
When disabled, the BIOS will display
the NEC logo during POST.
Cannot be disabled during Console
Redirection.
[No] Select "Yes" if you want to clear the
system configuration data at the next
Yes
boot. Automatically reset to "No" in
the next boot.
Specify whether the numlock is
On
enabled or disabled on booting.
[Off]
[Boot] If "Halt" is selected, the boot is
stopped when POST detected a
Halt
processor or memory error.
Be sure to take a note of boot priority before selecting
Your Setting
[ ]: Factory-set