Special Settings; Resetting The Receiver To Its Original State; Updating The Digital Receiver Software - Grundig DTR 1560 MICRO User Manual

28

SPECIAL SETTINGS

Resetting the receiver to its original state

This function enables you to delete the station lists and all custom
settings.
1 In the main menu, select »Box Settings« with »P-« or »P+« and
press »OK« to confirm.
Select »Restore Factory Settings« with »P-« or »P+« and press
2
»OK« to confirm.
Press » « or » « to select »Yes« and press »OK« to confirm.
3
– The receiver switches itself off and then on again.
– The »Initial installation« menu appears.
Reprogram the device as described on page 11.
4

Updating the digital receiver software

The digital receiver's technology enables you to update the soft-
ware.
The digital receiver must be in standby to receive software updates.
The receiver checks for software updates every night between
01:00 and 05:00. If there is an update, the receiver will automati-
cally update its software.
You can also search for updates manually.
In the main menu, select »Technical Information« with »P-« or
1
»P+« and press »OK« to confirm.
Select »System Information« with »P-« or »P+« and press
2
»OK« to confirm.
Select »Update Software« with »OK«
3
4 Press » « or » « to select »Yes« and press »OK« to confirm.
– The receiver checks for a more recent update. The actual
update is always carried out in the time period mentioned
above.
Note:
An interruption during the downloading process (for example
by pulling out the mains plug) can damage the operating soft-
ware of the digital receiver.
Read the instructions in the menus carefully.
______________________________