RAM 2012 Owner's Manual page 78

76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3. Pass each tether strap hook under the head restraint
and through the loop of webbing behind the child seat.
4. Route each tether strap to the anchor behind the center
seat, and attach the hooks to the anchor loop.
5. Place a child restraint on the center rear seat and
adjust the tether strap so that it will reach under the head
restraint through the center seat tether strap loop and
anchor to the tether strap loop located behind either
outboard seating positions.
6. Install each child restraint and remove the slack in the
tether strap according to the child restraint manufactur-
er's instructions.
Multiple Child Restraint Crew Cab
1 — Anchor Loops
2 — Snap Hook
3 — Tether Strap
4 — Passenger's Side Rear Child Seat
5 — Rear Center Child Seat
6 — Driver's Side Rear Child Seat