Windshield Wiper Operation; Intermittent Wiper System - RAM 2012 Owner's Manual

Truck chassis cab
Hide thumbs Also See for RAM 2012:
Table of Contents

Advertisement

Windshield Wiper/Washer Switch

Windshield Wiper Operation

Rotate the end of the lever upward, to the first detent past
the intermittent settings for low-speed wiper operation.
Rotate the end of the lever upward to the second detent
past the intermittent settings for high-speed wiper
operation.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155

Intermittent Wiper System

The intermittent feature of this system was designed for
use when weather conditions make a single wiping cycle,
with a variable pause between cycles, desirable. For
maximum delay between cycles, rotate the control knob
into the upper end of the delay range.
The delay interval decreases as you rotate the knob until
it enters the low continual speed position. The delay can
be regulated from a maximum of about 18 seconds
between cycles, to a cycle every one second. The delay
intervals will double in duration when the vehicle speed
is 10 mph (16 km/h) or less.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

2012 truck chassis cab

Table of Contents