Cassette Mode; General Information About Cassette Mode - Grundig SPACE FIDELITY PA 6 User Manual

TAPE
NO CASS
OPEN
40

CASSETTE MODE

General information about cassette mode

Protect your cassettes from humidity, dust, heat and cold.
Do not store your cassettes near devices with strong magnetic fields such as
television sets or stereo speakers.
After using a cassette, put it back in its protective case.
Keep tape-guiding parts such as pich roller, capstan, magnetic heads and erase
heads free of dirt and dust to maintain a good recording and playback quality.
Clean these parts occasionally using special cleaning cassettes.
Selecting the Cassette input source
1
Select the input source by pressing »TAPE« on the remote control,
or
press »SOURCE« on the top of the HiFi until »TAPE« is shown in the display.
– If there is no cassette in the cassette compartment, the display will show the
message »NO CASS«.
Inserting a cassette
Note:
We suggest that you use only ferric oxide (I/Fe), chrome (II/Cr) or metal
(IV/ME) cassettes. The HiFi will automatically adapt to the type of cassette used.
For recording we suggest the use of ferric oxide (I/Fe) or chrome (II/Cr)
cassettes.
1
Open the cassette compartment by pressing
top of the HiFi.
– The CD compartment opens and the display reads: » OPEN«.
_________________________________________________________
»TAPE OPEN/CLOSE« on the