General Functions; Basic Functions; Selecting The Input Source - Grundig SPACE FIDELITY PA 6 User Manual

GENERAL FUNCTIONS

WELCOME TO GRUN
CD
TUNER
TAPE
AUX

Basic functions

Switching on/off
1
Switch on the system at the HiFi by pressing
– The green indicator in the
front of the HiFi are lit.
– When you first switch on the HiFi system it is muted for approximately
three seconds. The display reads: »
FIDELITY «.
– The input source which was selected before the HiFi was switched off is auto-
matically activated.
Note:
If the HiFi system had been in Stand-by mode before it was turned off using
the »POWER
the »POWER
2
Press »POWER
Switching the HiFi to Stand-by
1
The HiFi can be switched to Stand-by with » «.
2
To turn the system on from the Stand-by mode, select the desired programme
source with »CD«,

Selecting the input source

1
Select the desired input source with the »CD«,
»AUX« button on the remote control.
or
Select the desired programme source by pressing »SOURCE« at the
HiFi system.
– The display reads: » C D « or » T U N E R « or » T A P E « or » A U X «.
»POWER « button and the green light on the
« button, it automatically returns to Stand-by if you then press
« button again.
« to switch of f the HiFi.
»TUNER «, »TAPE« or »AUX«.
_________________________________________
»POWER «.
WELCOME TO GRUNDIG SPACE
»TUNER «, »TAPE« or
25