Alpine CVA-1000E Owner's Manual page 62

4
Divider
PSET
Custom
C H
Low
31.5
vol. 35
5
6
62
CONT.
X-OVER/
LEVEL/
STEP
T-CR/
31.5 Hz
P.UP
F Hz
400 P.DOWN
R 400
DN RTN UP
Audio Processor
Operation
Select the frequency range you want to adjust.
When the F1 (X-OVER) button is pressed once,
the display shows the adjustment value of the
crossover point.
Each press changes the frequency ranges as
follows:
When only one divider is connected
Low F-High
When two dividers are connected
Low High
The cross-over adjustment mode is activated
and the "DN/RTN/UP" menu appears.
Turn the rotary switch clockwise or counter
clockwise to adjust the Cross-Over point
upward or downward to your desired point.
When the adjustment has been completed,
press the rotary switch. The display returns to
the Set Up List screen.
English
R-High