Cassette Player Operation - Alpine CVA-1000E Owner's Manual

1
SOURCE
2
3
TAPE
MODE
PLAY
METAL
vol. 0
4
Controlling Cassette
Player (Optional)
If an optional Alpine cassette player is con-
nected to the CVA-1000E, the cassette player
can be controlled from the CVA-1000E.
Press the SOURCE button on the CVA-1000E
to select a desired source unit.
The menu screen appears.
Note: Pressing the SOURCE button while
Turn the rotary switch on the CVA-1000E to
select the TAPE menu, then press the rotary
switch.
x
The display changes to the tape player control
screen.
Insert a pre-recorded tape into the tape player.
The tape player starts playing.
Press the F5 (DOLBY NR) button to select a
F F
desired Dolby NR mode. Each press changes
REW
the Dolby NR modes. (Depending on the tape
PROG
player connected, the modes vary.)
REPEAT
DOLBY NR
B.SKIP
/
To eject the cassette tape, press the Eject
button on the tape player.
Note: When a metal cassette tape is inserted,
Cassette Player
Operation
driving (Parking Brake OFF) will cause
the audio source to change immedi-
ately. The SOURCE Selection menu
will not appear. Press the SOURCE
button repeatedly until you are in the
cassette player mode.
the player automatically adjusts to the
equalization for metal or any other high
bias tape for optimum sound.
English English
29