Adjusting Bass - Alpine CVA-1000E Owner's Manual

1
SET UP
2
3
4
5
12
SET UP
BEEP
SPE-ANA
CLK DISP.
EQUALIZER
SURROUND
B B E
L P S
TIME CORR.
SUB WOOFER
vol. 0
menu
BEE LPS T–CR SubW. SystemCont.
Audio
BASS
±
0
TREBLE
±
0
BALANCE
0
FADER
0
vol. 27
LOUDNESS
BASS
TREBLE
BALANCE
FADER
RETURN
Basic Operation

Adjusting Bass

Note: When an Ai-NET compatible equalizer
Press the SET UP button.
The Set Up screen appears.
BBEP
OFF
The menu for each mode will be displayed at
SPE-ANA
OFF
OFF
the bottom of the screen.
CLK DISP.
Pops
Stadium
DEMO
Note: The Parking Brake must be ON to
Custom
Front–L
Custom
ON
Turn the rotary switch to scroll the bottom menu
and select and move "Audio cont." menu to the
CONT.
LOUDNESS
extreme end of right side. Then press the rotary
switch. The audio control screen appears.
BASS
TREBLE
BALANCE
FADER
RETURN
Press the F3 (BASS) button to select the BASS
mode. The DN/RTN/UP (Down/Return/Up)
menu appears at the bottom of screen.
Turn the rotary switch clockwise or
counterclockwise to increase or decrease to
obtain the desired level of the bass sound.
When the desired level is obtained, press the
rotary switch to set at that level.
The display returns to the set up screen.
is connected, the bass menu will not
appear on the screen. In this case,
adjust bass sound using the equalizer.
access the SET UP screen. Trying to
access this screen while driving will
display the warning – CAN'T OPERATE
WHILE DRIVING.
English